CANOGA PERKINS 9171 Command Reference - Manual (Page 317)

CanogaOS Command Reference
17-5
Command Syntax
router vrrp group
no router vrrp group
group Group number to which the tracking applies. The group number range is from 1 to
255.
Default
No VRRP group is defined.
Command Mode
Global configuration
Usage
Examples
The following is sample output from the router vrrp command:
Switch(config)# router vrrp 1
Related Commands
17.7 track (VRRP)
To configure the Virtual Router Redundancy Protocol (VRRP) to track an object, use the track command
in router configuration mode. To disable the tracking, use the no form of this command.
Command Syntax
track interface interface-name [decrement-priority]
no track interface
interface-name Interface name.
decrement-priority (Optional) Amount by which the priority for the router is decremented
(or incremented) when the tracked object goes down (or comes back
up). The default value is 10. Decrements can be set to any value
between 1 and 255.
Default
The default decrement value is 10. The range is from 1 and 255.
Command Mode
Router configuration
Usage