CANOGA PERKINS 9171 Command Reference - Manual (Page 330)

CanogaOS Command Reference
18-11
Type : Response Time Reporter(RTR) Reachability
Interface : eth-0-2
State : down
Delay up : 30 seconds
Delay down : 30 seconds
18.16 TRACK
To track an object in vrrp process, use the track to command in vrrp mode.
To remove track object in vrrp process, use the no form of this command.
Command Syntax
track objected
no track
Syntax Description
objectid Object identity is used to identify track object, its
range is from 1 to 500;
Command Mode
Vrrp mode
Defaults
none
Examples
In the following example, the track command is used to create an track object:
Switch(config-router)#track 1
Related Commands
Show vrrp
18.17 SHOW VRRP
To show track object in vrrp process, use the show vrrp to command in EXEC
mode.
Command Syntax
show vrrp
Syntax Description
None