CANOGA PERKINS 9171 Command Reference - Manual (Page 439)

CanogaOS Command Reference
25-27
Switch# configure router
Switch(config)# router ldp
Switch(config-router)#
25.31 Related Commandsrouter-id
Use this command to set the router-id to the supplied IP address; the router
uses this address to generate the LDP-ID.
Use the no parameter with this command to revert to using the first IP address
configured on the box as the router-id for LDP-ID generation purposes.
Command Syntax
(no) router-id A.B.C.D
Syntax description
A.B.C.D The new IP address.
Command Mode
Router mode
Defaults
This command has no default settings.
Examples
In the following example, the router-id command is used to set the router-id to
the supplied IP address:
Switch# configure router
Switch(config)# router ldp
Switch(config-router)# router-id 123.123.123.8
Related Commands
25.32 show debugging ldp
Use this command to display the status of the debugging of the LDP system.