CANOGA PERKINS 9171 Command Reference - Manual (Page 131)

CanogaOS Command Reference
7-28
Usage
Examples
The following is an output of this command displaying the mstp information. The down interface should
not be show.
Switch#show spanning-tree mst config
MSTP Configuration Information:
-----------------------------------------------------------------------
Format Id : 0
Name : My Name
Revision Level : 0
Digest : 0x69285BFFFF31FF13FFFFFF2D70FF23FFFFFFB4
Instances configured 2
-----------------------------------------------------------------------
Instance Vlans mapped
-----------------------------------------------------------------------
0 1
2 2
15 15
-----------------------------------------------------------------------
Related Commands
7.41 show spanning-tree mst detail
Use this command to show the detail mstp information.
Command Syntax
show spanning-tree mst detail [interface interface-id]
interface-id The interface name you want to display
Command Mode
Privileged Exec modes
Default
Usage
Examples
The following is an output of this command displaying the detail mstp information.
Switch#show spanning-tree mst detail interface eth-0-1