CANOGA PERKINS 9171 Command Reference - Manual (Page 327)

CanogaOS Command Reference
18-8
When the state of ip sla entry is OK , track object state is up; otherwise track
object state is down.
Command Syntax
track objected rtr entrynumber state
no track objectid
Syntax Description
objectid Object identity is used to identify track object, its
range is from 1 to 500;
entrynumber Entry number is used to identify ip sla monitor
entry, its range is from 1 to 500;
Command Mode
Global configuration
Defaults
none
Examples
In the following example, the track rtr state command is used to create an track object:
Switch(config)#track 1 rtr 1 state
Switch(config-track)#
Related Commands
Show track
18.12 TRACK
To configure an track object, use the track to command in global configuration
mode.
Command Syntax
track objected
Syntax Description
objectid Object identity is used to identify track object, its
range is from 1 to 500;
Command Mode
Global configuration
Defaults
none