CANOGA PERKINS 9171 Command Reference - Manual (Page 205)

CanogaOS Command Reference
14-12
Command Mode
Router configuration
Usage
The metric value specified in the redistribute command supersedes the metric value specified using
the Default -metric command.
Examples
The following example redistribute the static routes into RIP with metric 10:
router rip
network 10.108.0.0/16
redistribute static metric 10
!
Related Commands
default-metric
14.16 router rip
To configure the Routing Information Protocol (RIP) routing process, use the router rip command in
global configuration mode. To turn off the RIP routing process, use the no form of this command.
Command Syntax
router rip
no router rip
Default
No RIP routing process is defined.
Command Mode
Global configuration
Usage
Examples
The following example shows how to begin the RIP routing process:
Switch(config)# router rip
Related Commands
network (RIP)