CANOGA PERKINS 9171 Command Reference - Manual (Page 656)

39-3
Examples
The following example deletes the file named test from the flash:
Switch# delete flash:/test
Are you sure to delete flash:/test? [yes/no]:y
Switch#
Related Commands
copy
39.4 dir
To display a list of files on a file system, use the dir command in EXEC mode.
Command Syntax
dir [flash:][directory-name][file-name]
flash: The flash system.
directory-name The directory in flash:
file-name The file name.
Command Mode
EXEC
Default
The default file system is specified by the cd command.
Usage
Use the show (Flash file system) command to display flash information.
Examples
The following is sample output from the dir command:
Switch# dir
Directory of flash:/
total 42
drwxr-xr-x 2 0 Jul 30 15:42 boot
drwxr-xr-x 3 0 Jan 1 1970 conf
drwxr-xr-x 2 0 Jan 1 1970 log
-rw-r----- 1 1020 Jul 29 19:18 startup-config.conf
-rw-r--r-- 1 10270 Jul 30 10:10 syslog
-rw-r--r-- 1 6886 Jul 29 23:59 syslog.1.gz
63.0M bytes total (30.4M bytes free)
Switch#
CanogaOS Command Reference