Dell PowerEdge C6220 - Manual (Page 123)

Using the System Setup Program | 123
Token Setup option Description
02C7 Data Reuse
Optimization Sets to enable (Default) for HPC applications.
02C8 Data Reuse
Optimization Sets to disable for energy efficiency.
02C9 QPI Bandwidth
Priority Sets to Compute (Default) for computation-intensive
applications.
02CA QPI Bandwidth
Priority Sets to I/O for I/O-intensive applications.
02CE DCU IP
Prefetcher
This field enables (Default) the DCU IP Prefetcher.
02CF DCU IP
Prefetcher This field disables the DCU IP Prefetcher.
401A Terminal Type The BIOS console redirection, if enabled, operates in
VT100 emulation model. See also tokens BFh, C0h, and
D7h.
401B Terminal Type The BIOS console redirection, if enabled, operates in
ANSI emulation model. See also tokens BFh, C0h, and
D7h.
401C Redirection After
BIOS POST The BIOS console redirection, if enabled, continues to
operate after the OS boot hand-off.
401D
Redirection After
BIOS POST The BIOS console redirection, if enabled, operates
during the BIOS boot only and is disabled prior to OS
boot hand-off. See also tokens BFh, C0h, D7h, 401Ah
and 401Bh.
4022 1st Boot Device Whenever the BIOS boots the system, the first PXE-
capable device is inserted as the first device in the boot
sequence. Enabling this feature causes the BIOS operation
to occur on the next and all subsequent boots and causes a
change in the system's defined boot sequence. The BIOS
chooses the first PXE-capable device as the system's
onboard network controller, if present and enabled, or the
first bootable network device found in the system's
standard PCI search order.
whichever comes first.