Dell PowerEdge C6220 - Manual (Page 208)

208 | Installing System Components
Optional Mezzanine Cards
Removing the LSI 2008 SAS Mezzanine Card
NOTE: The LSI 2008 SAS mezzanine card is seated in PCI-E Gen3 x8 mezzanine
slot 3 on the system board, which is not active in 1-processor configuration. See
“System Board Connectors” on page 309 for the location.
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
1 Remove the system-board assembly. See “Removing a System-Board
Assembly" on page 157.
2 Disconnect all the cables from the LSI 2008 SAS mezzanine card.
3 Remove the three screws that secure the LSI 2008 SAS mezzanine card.
See Figure 3-41.
4 Lift the LSI 2008 SAS mezzanine card out of the system-board
assembly. See Figure 3-41.