Dell PowerEdge C6220 - Manual (Page 119)

Using the System Setup Program | 119
Token Setup option Description
01CF I/OAT DMA
Engine Enables the I/O Acceleration Technology (I/OAT) DMA
Engine option. This feature should be enabled only if the
hardware and software support I/OAT.
01D0 I/OAT DMA
Engine Disables the I/O Acceleration Technology (I/OAT) DMA
Engine option. This feature should be disabled only if the
hardware and software support I/OAT.
01DA Embedded NIC1 Enables NIC1 with iSCSI Remote Boot.
01DB Embedded NIC2 Enables NIC2 with iSCSI Remote Boot.
01EA Turbo Mode Disables Intel's processor allows the processor core to
increase its frequency.
01EB Turbo Mode Enables Intel's processor allows the processor core to
increase its frequency.
01F0 Embedded NIC3 Disables the system’s third embedded network interface
controller.
01F1 Embedded NIC3 Enables the system’s third embedded network interface
controller, but don’t enable the NIC’s associated PXE or
RPL boot-ROM.
01F2 Embedded NIC3 Enables the system’s third embedded network interface
controller (full-function), including its PXE boot-ROM.
01F3 Embedded NIC3 Enables NIC3 with iSCSI Remote Boot.
0204 VT for Direct I/O Disables Intel Virtualization Technology for Direct I/O
(VT-d) that enhances I/O support (DMA) when running a
Virtual Machine Monitor.
0205 VT for Direct I/O Enables Intel Virtualization Technology for Direct I/O
(VT-d) that enhances I/O support (DMA) when running
a Virtual Machine Monitor.
0211 Internal USB
PORT This field disables the internal USB port.
0212 Internal USB
PORT This field enables the internal USB port.
021F
Maximum
Performance
This will set the Maximum Performance mode in the
system.
0221 OS Control Allows OS to change the P-state.