Dell PowerEdge C6220 - Manual (Page 322)

322 | Jumpers and Connector
Jumper Settings
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
System Configuration Jumper Settings
The function of system configuration jumper installed on each system
board is shown below:
Figure 5-17. System Configuration Jumpers
Table 5-1. System Configuration Jumper
Jumper
Function Off On
Service Mode *Disable Enable
NVRAM Clear *Disable Enable
BIOS Recovery *Disable Enable
ME Firmware Recovery *Disable Enable
MEDBG1 *Disable Enable
Power Button Pass *Disable Enable
Jumper Function Pin1-2 Pin2-3
PWRD_EN *Enable Disable