Dell PowerEdge C6220 - Manual (Page 133)

Using the System Setup Program | 133
Token Setup option Description
48CD QPI Frequency Sets the QPI frequency runs at 8.000GT.
48D0
Energy Efficient
Policy
Controls the energy efficient policy as performance profile
to configure all necessary settings.
48D1 Energy Efficient
Policy Default, controls the energy efficient policy as balance
profile to configure all necessary settings.
48D2 Energy Efficient
Policy Controls the energy efficient policy as low power profile to
configure all necessary settings.
48D3 Direct Cache
Access Disables the Direct Cache Access.
48D4 Direct Cache
Access Enables the Direct Cache Access.
48D8 Load
Customized
Defaults Requests a customized default of SETUP values on the
next boot.
48DA Save
Customized
Defaults Saves current settings to customized defaults of SETUP
on next boot.
48DB N/A Requests maximum performance settings of SETUP
values on the next boot.
48DC N/A Requests a energy efficiency settings of SETUP values on
the next boot.
48DD N/A Requests HPCC efficiency settings of SETUP values
on the next boot. Dell will provide the settings before
A-can BIOS.
48DE EFI Shell Requests the EFI Shell as first boot device on the next
boot.
48DF Dell ePSA
Diagnostic Tool Requests auto launchs ePSA diagnostic tool on the next
boot.
48E0 N/A The NIC3 is used for 1st device of PXE boot on the next
boot, followed by NIC1.
48E1 N/A The NIC4 is used for 1st device of PXE boot on the next
boot, followed by NIC1.