Dell PowerEdge C6220 - Manual (Page 12)

1
12 | About Your System
About Your System
Accessing System Features During Startup
The following keystrokes provide access to system features during startup.
Note that the hot-keys of SAS/SATA card or PXE support are available in
BIOS boot mode only. There is no hot-key to boot through the UEFI.
Keystroke Description
Enters the System Setup program. See “Start Menu” on page 62.
Enters the BIOS Boot Manager. See “Boot Manager” to select
boot device on page 63.
Starts Preboot eXecution Environment (PXE) / iSCSI boot.
Enters the LSI 2008 SAS Mezzanine Card Configuration Utility.
For more information, see the SAS adapter documentation.
Enters the LSI 9265-8i Card Configuration Utility. For more
information, see the documentation for your SAS RAID card.
Enters the MegaCLI SAS RAID Management Tool.
Enters the utility to configure onboard LAN settings for PXE
boot. For more information, see the documentation for your
integrated LAN.
Enters onboard SATA Controller’s Configuration Utility.
Enter the Intel iSCSI setup menu.