Dell PowerEdge C6220 - Manual (Page 131)

Using the System Setup Program | 131
Token Setup option Description
488F 4th Boot Device Sets Network as 4th boot device.
4890 4th Boot Device Sets Hard Disk as 4th boot device.
4891 4th Boot Device Sets RAID as 4th boot device.
4892 4th Boot Device Sets USB Storage as 4th boot device.
4893 4th Boot Device Sets CD/DVD ROM as 4th boot device.
4894 5th Boot Device Sets Network as 5th boot device.
4895 5th Boot Device Sets Hard Disk as 5th boot device.
4896 5th Boot Device Sets RAID as 5th boot device.
4897 5th Boot Device Sets USB Storage as 5th boot device.
4898 5th Boot Device Sets CD/DVD ROM as 5th boot device.
48A0 ACPI SPMI
Table Disables the ACPI SPMI Table for BMC ROM update.
48A1 ACPI SPMI
Table Enables the ACPI SPMI Table for IPMI driver installation.
48A2 BMC LAN Port
Configuration Sets BMC LAN Port to Dedicated-NIC.
48A3 BMC LAN Port
Configuration Sets BMC LAN Port to Shared-NIC.
48A4
BMC NIC IP
Source
Sets BMC LAN to get LAN IP from Static mode.
48A5 BMC NIC IP
Source
Sets BMC LAN to get LAN IP from DHCP mode.
48A6 IPv6 Mode Disables IPv6 internet protocol support.
48A7 IPv6 Mode Enables IPv6 internet protocol support.
48A8 IPv6 AutoConfig Disables IPv6 auto configuration.
48A9 IPv6 AutoConfig Enables IPv6 auto configuration.
48AA Serial Port Mode Console Redirection baud rate will be set to 3,8400 bits
per second.
48AB Flow Control Remote access flow controls by none.
48AC Flow Control Remote access flow controls by hardware.