Dell PowerEdge C6220 - Manual (Page 192)

192 | Installing System Components
NOTE: When connecting the RAID battery cable, the BBU interposer card
should be installed on the LSI 9265-8i card. The BBU interposer card in the
figure below is just for you reference.
Figure 3-28. Cable Routing for LSI 9265-8i Card
Item Cable From
(LSI 9265-8i Card)
To
(RAID Battery and Hard
Drive to Backplane
SATAII Connectors)
Mini-SAS
/SGPIO cable Mini-SAS connector
0~3 (J2B1) SATAII connectors
0~3 and SGPIO 1 on
the interposer
extender for 2U node
Mini-SAS
cable Mini-SAS connector
4~7 (J2B2) Mini-SAS connector 0
on the system board
RAID battery
cable RAID battery connector
(J4) RAID battery
connector on the
RAID battery
power cable Control connector (J3)
on the interposer
extender Front panel connector
1 on the system board