Dell PowerEdge C6220 - Manual (Page 163)

Installing System Components | 163
3 Position your thumb firmly over the processor socket-release lever and
release the lever from the locked position. Rotate the lever 90 degrees
upward until the processor is released from the socket. See Figure 3-12.
4 Rotate the processor shield upward and out of the way. See Figure 3-12.
5 Lift the processor out of the socket and leave the socket-release lever
up so that the socket is ready for the new processor. See Figure 3-12.
CAUTION: Be careful not to bend any of the pins on the C socket when removing
the processor. Bending the pins can permanently damage the system board. Be
sure to properly align the process or notch to the socket and insert straight down.
Do not move from side to side.
Figure 3-12. Removing and Installing a Processor
1 processor shield 2 processor
3 notch in processor (4) 4 socket key (4)
5 socket-release lever (2) 6 CPU socket