Dell PowerEdge C6220 - Manual (Page 115)

Using the System Setup Program | 115
Token Setup option Description
0088
Video
Enumeration The first add-in video controller is used for boot-time
messages. Depending on the BIOS search order and
system slot layout.
008C Embedded USB
Controller
Causes the BIOS to enable the built-in USB controller at
system startup.
008D
Embedded USB
Controller
Causes the BIOS to disable the built-in USB controller at
system startup.
00A1
Restore on AC
Power Loss
After an AC power loss, when AC power is restored, the
system will stay off.
00A2 Restore on AC
Power Loss After an AC power loss, when AC power is restored, the
system will return to the state was in when power was lost.
00A3 Restore on AC
Power Loss
After an AC power loss, when AC power is restored, the
system will power on.
00BA Embedded NIC2 Disable the system’s secondary embedded network
interface controller.
00BB Embedded NIC2 Enable the system’s secondary embedded network
interface controller, but don’t enable the NIC’s associated
PXE or RPL boot-ROM.
00BC Embedded NIC2 Enable the system’s secondary embedded network
interface controller (full-function), including its PXE
boot-ROM.
00BF Remote Access Serial Console Redirection Off.
00C0 Serial port
number Serial Console Redirection On, output to COM1. See also
token D7h.
00C1 Power Button Default, Enables Power Button to turn off system.
00C2 Power Button Disables Power Button to turn off system.
00D1 Hyper-Threadin
g Technology Enables Hyper-Threading Technology.
00D2 Hyper-Threadin
g Technology
Disables Hyper-Threading Technology.