Removing the lsi 9265-8i raid battery – Dell PowerEdge C6220 User Manual
Page 197
Installing System Components | 197
Removing the LSI 9265-8i RAID Battery
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
NOTE: The information in this section applies only to systems with the optional
RAID controller card.
1 Remove the system-board assembly. See “Removing a System-Board
2 Disconnect the cable connecting to the LSI 9265-8i card.
3 When removing the LSI 9265-8i RAID battery for 1U node, skip to
step 6; for 2U node, continue the steps.
4 Remove the interposer extender. See “Removing the Interposer
5 Remove the interposer-extender tray. See “Removing the Interposer
Extender Tray” on page 168.
6 Remove the LSI 9265-8i RAID battery assembly. See “Removing the
LSI 9265-8i raid battery Assembly” on page 195.