Dell PowerEdge C6220 - Manual (Page 118)

118 | Using the System Setup Program
Token Setup option Description
0169 Max CPUID
Value Limit Some OS's (NT4) will fail if the value returned in EAX
is > 3 when CPUID instruction is executed with EAX=0.
This setting will limit CPUID function to 3.
016F
Embedded SAS
Controller Disables the SAS controller. The token applies to on-board
SAS controller
0170
Embedded SAS
Controller Enables the SAS controller. Sets the device class code as
AHCI/RAID and executes the RAID Option ROM. This
token applies to on-board SAS controller.
0171 Adjacent Cache
Line Prefetch The processor will only fetch the cache line that contains
the data currently required by the processor.
0172 Adjacent Cache
Line Prefetch Enables the processor to fetch the adjacent cache line in
the other half of the sector.
0173 Hardware
Prefetcher Disables the processor's HW prefetcher.
0174 Hardware
Prefetcher Enables the processor' HW prefetcher.
0178 Remote Access Enables Serial Console Redirection.
0189 External USB
PORT2 This feature will allow the users to electrically disable the
external USB port2.
018A External USB
PORT2 This feature will allow the users to electrically enable the
external USB port2.
0199 Power Saving
Features This feature will allow users to disable the feature that
allows SATA HDDs to initiate link power management
transitions.
019A Power Saving
Features This feature will allow users to enable the feature that
allows SATA HDDs to initiate link power management
transitions.
01C4 NUMA Support For BIOS Setup to allow user enable the node interleave
option. This is for NUMA systems that allow memory
interleaving across all processor nodes.
01C5 NUMA Support For BIOS Setup to allow user disable the node interleave
option. This is for NUMA systems that allow memory
interleaving across all processor nodes.