Dell POWEREDGE M1000E - Manual (Page 606)

606 Configuring VLANs
Configuring VLANs (CLI)
This section provides information about the commands you use to create and
configure VLANs. For more information about the commands, see the
PowerConnect M6220/M6348/M8024/M8024-k CLI Reference Guide at
support.dell.com/manuals .
Creating a VLAN
Beginning in Privileged EXEC mode, use the following commands to
configure a VLAN and associate a name with the VLAN.
Command Purpose
configure Enter global configuration mode.
vlan { vlan-id |vlan-
range}
Create a new VLAN or a range of VLANs and enter the
interface configuration mode for the specified VLAN or
VLAN range.
• vlan-id—A valid VLAN IDs (Range: 2–4093).
• vlan-range — A list of valid VLAN IDs to be added. List
separate, non-consecutive VLAN IDs separated by
commas (without spaces); use a hyphen to designate a
range of IDs. (Range: 2–4093)
NOTE: You can also create with this command in VLAN
Database mode . To enter VLAN Database mode, use the vlan
database command in Global Configuration mode.
name string Add a name to the specified VLAN.
string — Comment or description to help identify a
specific VLAN (Range: 1–32 characters).
CTRL + Z Exit to Privileged EXEC mode.
show vlan [id vlan-id |
name vlan-name]
Display VLAN information.
• vlan-id — A valid VLAN ID. (Range: 1–4093)
• vlan-name — A valid VLAN name string. (Range: 1–32
characters)