Dell POWEREDGE M1000E - Manual (Page 1075)

Configuring IPv6 Routing 1075
ipv6 route ipv6-
prefix/prefix-length null
[ preference]
Configure a static reject route.
ipv6 route distance
integer
Set the default distance (preference) for static IPv6
routes. Lower route preference values are preferred when
determining the best route.
exit Exit to Global Config mode.
show ipv6 route [ ipv6-
address | ipv6-
prefix/prefix-length |
protocol | interface-type
interface-number] [best]
View the routing table.
• ipv6-address—Specifies an IPv6 address for which the
best-matching route would be displayed.
• protocol—Specifies the protocol that installed the
routes. Is one of the following keywords: connected,
ospf, static.
• ipv6-prefix/ prefix-length—Specifies an IPv6 network
for which the matching route would be displayed.
• interface-type interface-number—Valid IPv6 interface.
Specifies that the routes with next-hops on the selected
interface be displayed.
• best—Specifies that only the best routes are displayed.
If the connected keyword is selected for protocol, the
best option is not available because there are no best or
non-best connected routes.
show ipv6 route summary View summary information about the routing table.
show ipv6 route
preferences
View detailed information about the route preferences.
Command Purpose