Dell POWEREDGE M1000E - Manual (Page 1218)

1218 Managing IPv4 and IPv6 Multicast
ip pim rp-address rp-address
group-address group-mask
[override]
(Optional) Statically configure the RP address for one
or more multicast groups. Only one RP address can be
used at a time within a PIM domain
The optional keyword override indicates that if there
is a conflict, the RP configured with this command
prevails over the RP learned by BSR.
ip pim ssm {default | group-
address group-mask }
Define the Source Specific Multicast (SSM) range of
IP multicast addresses.
• default — Defines the SSM range access list to
232.0.0.0/8.
• group-address group-mask — defines the SSM range.
interface vlan vlan-id Enter Interface Configuration mode for the specified
VLAN.
ip pim hello-interval seconds Specify the number of seconds (range: 0–65535) to
wait between sending PIM hello messages on the
interface.
ip pim bsr-border Prevent bootstrap router (BSR) messages from being
sent or received through the interface.
ip pim dr-priority priority Set the priority value for which a router is elected as
the designated router (DR). The election priority
range is 0–2147483647.
ip pim join-prune-interval
interval
Configure the interface join/prune interval for the
PIM-SM router. The interval range is 0–18000
seconds.
exit Exit to Global Config mode.
exit Exit to Privileged EXEC mode.
show ip pim View system-wide PIM-DM information.
show ip pim interface vlan
vlan-id
View the PIM-SM information for the specified
interface.
show ip pim neighbor
[interface vlan vlan-id | all]
View a summary or all the details of the multicast
table.
Command Purpose