Dell POWEREDGE M1000E - Manual (Page 295)

Managing General System Settings 295
Figure 11-12. Port Aggregator Port Configuration Summary
3 To modify the port assignment, click any Modify link to access the Port
Configuration page.
4 If the system supports stacking, select the stack member to configure from
the Unit field.
5 Enter the Port Aggregator Group ID in the Group ID field for the ports to
add to a group.
Each port can only belong to only one Port Aggregator group.
6 Click Apply.
Removing Ports from an Aggregator Group
To remove a port from an aggregator group:
1. Open the Port Configuration Summary page.
2 Select the Remove option for the group with the ports to remove.
3 Click Apply.
All ports assigned to the Port Aggregator group are removed from the
group and are not assigned to any group.
NOTE: To delete a single port from a group, click Modify to access the Port
Configuration page, delete the group ID from the port’s Group ID field, and
then click Apply.