Dell POWEREDGE M1000E - Manual (Page 217)

Controlling Management Access 217
permit ip-source ip-
address [mask mask |
prefix-length] [interface-
type interface-number]
[service service] [priority
priority-value]
Allow access to the management interface from hosts that
meet the specified IP address value and other optional
criteria.
• interface-type interface-number — A valid port, LAG, or
VLAN interface, for example gi1/0/13, port-channel 3, or
vlan 200.
• ip-address — Source IP address.
• mask mask — Specifies the network mask of the source
IP address.
• mask prefix-length — Specifies the number of bits that
comprise the source IP address prefix. The prefix length
must be preceded by a forward slash (/). (Range: 0–32)
• service service — Indicates service type. Can be one of
the following: telnet, ssh, http, https, tftp, snmp, sntp, or
any.
• priority priority-value — Priority for the rule. (Range: 1 –
64)
permit { interface-type
interface-number}
[service service] [priority
priority-value]
Permit access to the management interface from the
specified port, VLAN, or LAG and meet the other optional
criteria.
permit service service
[priority priority-value]
Permit access to the management interface from the
specified service.
exit Exit to Global Configuration mode.
management access-
class {console-only |
name}
Activate the management ACL or restrict access so that it
is available only through the console port.
exit Exit to Privileged EXEC mode.
show management
access-class
Display information about the active management access
list.
show management
access-list [ name]
Display information about the configured management
ACL and its rules.
Command Purpose