Dell POWEREDGE M1000E - Manual (Page 1208)

1208 Managing IPv4 and IPv6 Multicast
exit Exit to Global Config mode.
exit Exit to Privileged EXEC mode.
show ip multicast View system-wide multicast information.
show ip mcast boundary
{vlan vlan-id | all}
View all the configured administrative scoped multicast
boundaries.
show ip mcast interface
[vlan vlan-id]
View the multicast information for all interfaces or for
the specified interface.
show ip mcast mroute
{detail | summary}
View a summary or all the details of the multicast table.
show bridge multicast
address-table count
View statistical information about the entries in the
multicast address table.
show ip mcast mroute
group groupipaddr {detail |
summary}
View the multicast configuration settings such as flags,
timer settings, incoming and outgoing interfaces, RPF
neighboring routers, and expiration times of all the
entries in the multicast mroute table containing the
groupipaddr value.
show ip mcast mroute
source sourceipaddr
{summary | groupipaddr}
View the multicast configuration settings such as flags,
timer settings, incoming and outgoing interfaces, RPF
neighboring routers, and expiration times of all the
entries in the multicast mroute table containing the
sourceipaddr or sourceipaddr | groupipaddr pair
value(s).
show ip mcast mroute static
[ sourceipaddr ]
View all the static routes configured in the static mcast
table if it is specified or display the static route
associated with the particular sourceipaddr.
Command Purpose