Dell POWEREDGE M1000E - Manual (Page 227)

Controlling Management Access 227
Exit to Privileged EXEC mode.
crypto certificate
number request
Generate and display a certificate request for HTTPS. This
command takes you to Crypto Certificate Request mode.
In this mode, you can use the following commands to
specify certificate details:
• common-name
• country
• email
• location
• organization-name
• organization-unit
• unit
• state
exit Exit to Privileged EXEC mode.
configure Enter Global Configuration mode.
crypto certificate
number import
Import the certificate into the switch by pasting an
external certificate (signed by the Certification Authority)
to the switch. To end the session, add a period (.) on a
separate line after the input, and press ENTER. This
certificate replaces the self-signed certificate.
If the public key found in the certificate does not match
the switch's SSL RSA key, the command fails.
ip http secure-certificate
number
Specify the active certificate for HTTPS.
ip http secure-server Allow access to the switch management interface by using
HTTPS, which is disabled by default.
exit Exit to Privileged EXEC mode.
Command Purpose