Dell POWEREDGE M1000E User Manual

Page 236

236

Controlling Management Access

4 View information about the authentication profiles. By default, Console

(serial) access uses the defaultList authentication. The defaultList does

not require authentication, but the networkList requires authentication by

verifying the user name and password against an entry in the local

database.

console#show authentication methods

---------------------------------

defaultList : none

networkList : local

Enable Authentication Method Lists

----------------------------------

enableList : none

Line Login Method List Enable Method List

------- ----------------- ------------------

Console defaultList enableList

Telnet networkList enableList

SSH networkList enableList

HTTPS :local

HTTP :local

DOT1X :

5 Configure the serial port for network (local) authentication. Telnet and

SSH are already configured for password lockout because it has been

globally enabled, and Telnet and SSH use the networkList authentication

method.

console#configure

console(config)#line console

console(config-line)#login authentication

networkList

console#exit

console>logout