Dell POWEREDGE M1000E - Manual (Page 199)

Controlling Management Access 199
Adding TACACS+ Host Information
To add a TACACS+ host:
1 Open the TACACS+ Settings page.
2 Click Add to display the Add a TACACS+ Host page.
3 Specify a the hostname or IP address of the TACACS+ the switch will use
to authenticate users.
4 Enter additional information about the TACACS+ host:
• Priority (0 is the highest),
• Port (default is 49)
• Authentication and encryption key for communication between the
switch and the TACACS+ host (default is no key)
• Timeout (default is 5 seconds)
Figure 9-20. Add a TACACS+ Host
5 Click Apply.
The user’s login information is added to the local database.
6 To view, edit, or remove a TACACS+ host configured on the switch, click
Show All.