Dell POWEREDGE M1000E - Manual (Page 321)

Managing General System Settings 321
Viewing Slot Information
Use the following commands to view information about Slot 0 and its
support.
clock summer-time
date { date month |
month date} year
hh:mm {date month |
month date} year
hh:mm [offset offset]
[zone acronym]
Use this command if the summer time does not start and
end every year according to a recurring pattern. You can
enter the month and then the date, or the date and then the
month.
• date— Day of the month. (Range: 1-31.)
• month — Month. (Range: The first three letters by name)
• hh:mm — Time in 24-hour format in hours and minutes.
(Range: hh: 0–23, mm: 0–59)
• offset — Number of minutes to add during the
summertime. (Range:1–1440)
• acronym — The acronym for the time zone to be displayed
when summertime is in effect. (Range: Up to four
characters)
CTRL + Z Exit to Privileged EXEC mode.
show clock [detail] View information about the time. Include the detail
keyword to view information about the time zone and
summer time.
Command Purpose
show slot Display status information about the expansion slots.
show supported cardtype Display information about the modules the switch
supports.
Command Purpose