Dell POWEREDGE M1000E - Manual (Page 486)

486 Configuring a Captive Portal
Managing Captive Portal Clients
The commands in this section are all executed in Privileged EXEC mode. Use
the following commands to view and manage clients that are connected to a
Captive Portal.
user group group-id
moveusers new-group-id
(Optional) Move all of the users in a group to a different
group. This command removes the users from the group
specified by group-id.
• group-id — Group ID (Range: 1–10).
• new-group-id — Group ID (Range: 1–10).
CTRL + Z Exit to Privileged EXEC mode.
show captive-portal user
[ user-id]
View summary information about all users configured in
the local database. Specify the user ID to view additional
information about a user.
user-id — User ID (Range: 1–128).
clear captive portal users (Optional) Delete all captive portal user entries from the
local database.
Command Purpose
show captive-portal
configuration [ cp-id]
client status
Display information about the clients authenticated to all
Captive Portal configurations or a to specific
configuration.
cp-id — The Captive Portal instance (Range: 1–10).
show captive-portal
interface interface client
status
Display information about clients authenticated on all
interfaces or no a specific interface.
interface — Specific Ethernet interface, such as gi1/0/8.
show captive-portal
client [ macaddr] status
Display client connection details or a connection summary
for connected Captive Portal users.
macaddr — The MAC address of the client.
captive-portal client
deauthenticate macaddr
Deauthenticate a specific captive portal client.
macaddr — The MAC address of the client.
Command Purpose