Dell POWEREDGE M1000E - Manual (Page 708)

708 Configuring Port-Based Traffic Control
Configuring Protected Ports
Beginning in Privileged EXEC mode, use the following commands to add a
name to a protected port group and add ports to the group.
show interfaces
datacenter-bridging
[ interface | port-channel
port-channel-id]
Display the datacenter-bridging configuration, status and
counters for a given interface.
clear priority-flow-
control statistics
[ interface | port-channel
port-channel-id]
Clear all PFC statistics or the PFC statistics for the
specified interface.
Command Purpose
configure Enter global configuration mode.
switchport protected
groupid name name
Specify a name for one of the three protected port groups.
• groupid — Identifies which group the port is to be
protected in. (Range: 0-2)
• name — Name of the group. (Range: 0-32 characters)
interface interface Enter interface configuration mode for the specified
interface. The interface variable includes the interface type
and number, for example gigabitethernet 1/0/3.
switchport protected
groupid
Add the interface to the specified protected port group.
CTRL + Z Exit to Privileged EXEC mode.
show switchport
protected
View protected group and port information.
Command Purpose