What interface types are supported – Dell POWEREDGE M1000E User Manual

Page 494

494

Configuring Port Characteristics

• Multiple port command — If a group of ports lose their link, the switch

brings up/down the link on another group of ports.

• Overlapping ports — Overlapping ports on different groups will be

brought up/down only if both dependent ports lose the link.

What Interface Types are Supported?

The physical ports on the switch include the out-of-band (OOB) interface,

10-Gigabit Ethernet (for some models), and Gigabit Ethernet switch ports.

The OOB interface supports a limited set of features and is for switch

management only. The Ethernet switch ports support many logical features

that are often supported by logical interfaces. The switch supports the

following types of logical interfaces:

• Port-based VLANs — For more information, see "Configuring VLANs" on

• VLAN routing interfaces — For more information, see "Configuring

• Link Aggregation Groups (LAGs), which are also called port channels) —

• Tunnels — For more information, see "Configuring Routing Interfaces"

• Loopback interfaces — For more information, see "Configuring Routing

The PowerConnect M6220, M8024, and M8024-k include expansion slots

that support optional modules that can provide additional physical ports. For

information about the expansion slots and the supported modules for each