Dell POWEREDGE M1000E User Manual

Page 285

Managing General System Settings

285

For the PCM6220 and PCM6348 switches, the same default configuration is

extended to each switch in the stack. The default configuration does not

include 10G ports as part of any Aggregator Group, although they can be

configured if desired.

Table 11-6. PCM8024 and PCM8024-k Default Port Aggregator Group Mapping

Aggregator
Group

Member Internal Ports

Member Uplink (External)
Ports

Group 1

Te1/0/1, Te1/0/2, Te1/0/3, Te1/0/4, Te1/0/5,

Te1/0/6, Te1/0/7, Te1/0/8, Te1/0/9,

Te1/0/10, Te1/0/11, Te1/0/12, Te1/0/13,

Te1/0/14, Te1/0/15, Te1/0/16

Te1/0/17, Te1/0/18,

Te1/0/19, Te1/0/20

Te1/0/21, Te1/0/22,

Te1/0/23, Te1/0/24

NOTE:

1G and 10G external ports cannot be used at the same time within the

same Aggregator Group.