Dell POWEREDGE M1000E User Manual
Page 223
Controlling Management Access
223
key [
key-string]
Set the authentication and encryption key for all RADIUS
communications between the switch and the RADIUS
server.
NOTE:
You can also use the radius-server key [
key-string]
command in Global Configuration mode to set the same
authentication and encryption key for all configured RADIUS
servers.
priority
priority
Specify the order in which the servers are to be used, with
0 being the highest priority. The range is 0-65535, with 0
being the highest priority.
primary
Specify that a configured server should be the primary
server in the group of authentication servers which have
the same server name.
exit
Exit to Global Configuration mode.
aaa accounting network
default start-stop group
radius
Enable RADIUS accounting on the switch.
exit
Exit to Privileged EXEC mode.
show aaa servers
[accounting |
authentication] [name
[
servername]]
Display the list of configured RADIUS servers and the
values configured for the global parameters of the
RADIUS client.
• accounting — This optional parameter will cause
accounting servers to be displayed.
• authentication — This optional parameter will cause
authentication servers to be displayed.
• name — This optional parameter will cause the server
names to be displayed instead of the server configuration
parameters.
•
servername — Will cause only the server(s) with server-
name name to be displayed. There are no global
parameters displayed when this parameter is specified.
Command
Purpose