Compex Systems Advanced SerialRAID Adapters SA33-3285-02 User Manual
Page 526

SSA loops (continued)
loops and data paths, examples
broken loop (disk drive removed)
one loop with two adapters in each of two using
one loop with two adapters in one using system
simple, one disk drive missing
simple, two disk drives missing
SSA RAID Array SMIT menu, getting access
SSA RAID arrays
adding a disk drive to an SSA RAID array
adding disks to a hot spare pool
canceling all SSA disk drive identifications
changing member disks in an SSA RAID array
changing or showing the attributes of an SSA RAID
changing or showing the status of a hot spare
changing or showing the use of an SSA disk
changing the use of multiple SSA physical
creating a hot spare disk drive
deleting an old RAID array recorded in an SSA RAID
deleting from the configuration
identifying and correcting or removing failed disk
identifying array candidate disk drives
identifying hot spare disk drives
identifying rejected array disk drives
identifying system disk drives
identifying the disk drives in an SSA RAID array
installing a replacement disk drive
listing all defined SSA RAID arrays
listing all SSA RAID arrays that are connected to a
listing all supported SSA RAID arrays
listing array candidate disk drives
listing old RAID arrays recorded in an SSA RAID
listing rejected array disk drives
SSA RAID arrays (continued)
listing the disk drives in an SSA RAID array
listing the disks that are in a hot spare pool
listing the status of all defined SSA RAID
removing a disk drive from an SSA RAID array
removing disks from a hot spare pool
showing the disks that are protected by hot
swapping members of an SSA RAID array
SSA Target mode
execution of Target Mode requests
SSA_GET_ENTRY_POINT ioctl operation
SSA_TRANSACTION ioctl operation
ssadisk SSA disk device driver
configuring SSA disk drive devices
logical and physical disks and RAID arrays
506
User’s Guide and Maintenance Information