Compex Systems Advanced SerialRAID Adapters SA33-3285-02 - Manual (Page 348)

If you cannot do this procedure because, for example, the boot disks are on the
SSA network, do the following:
a. Run diagnostics to the SSA adapter that is on the partner system, to ensure that
no array problems exist.
b. Wait until all coupled disk drives can be uncoupled, before you connect the new
adapter to the network.
6. Install the adapter into the using system (see the Installation and Service Guide for
the using system).
328 User’s Guide and Maintenance Information
|
|
|
|
|
|