Compex Systems Advanced SerialRAID Adapters SA33-3285-02 - Manual (Page 494)

v Array Candidate Disk if the use of hot spares is disabled
for the arrays on the subsystem
e. Go to step 38.
38. (from step 37)
You have changed the use of a disk drive. You must now ensure that the hot spare
pools are correctly configured. To do this action:
a. Type smitty ssaraid and press Enter.
b. Select List Status of Hot Spare Pools.
c. Select, in turn, each SSA adapter.
d. If you are using pools other than A0 and B0, the hot spare pool to which the
exchanged disk drive must now be added is listed with a status of reduced,
critical, or empty.
e. If multiple disk drives have been exchanged, and multiple hot spare pools
exist, either ask the customer which disk drives are to be assigned to which
hot spare pools, or see Chapter 5, “Hot Spare Management” on page 45 for
guidance.
f. Go to “MAP 2410: SSA Repair Verification” on page 475 to verify the repair.
474 User’s Guide and Maintenance Information
|
|
|