Compex Systems Advanced SerialRAID Adapters SA33-3285-02 - Manual (Page 166)

4. Select the disk drive that you want to change or show.
The following screen is displayed for the disk drive that you have chosen:
Change/Show Use of an SSA Physical Disk
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
SSA RAID Manager ssa0
SSA physical disk pdisk6
CONNECTION address 08005AEA080800D
Current use Hot Spare Disk +
F1=HelpF2=Refresh F3=Cancel F4=List
F5=Reset F6=Command F7=Edit F8=Image
F9=Shell F10=Exit Enter=Do
If you are only checking the use of the disk drive, and do not want to change it, go
no further with these instructions. Otherwise, go to step 5.
5. Note: If the Current Use field shows that the disk drive is owned by an array, you
cannot change that use.
Move the cursor to Current Use, and press the List key.
6. A list of uses is displayed. Make your selection, and press Enter.
146 User’s Guide and Maintenance Information