Compex Systems Advanced SerialRAID Adapters SA33-3285-02 - Manual (Page 384)

ssaidentify Command
Purpose
To set or clear Identify mode for a physical disk.
Syntax
ssaidentify -l PhysicalDiskName -y
ssaidentify -l PhysicalDiskName -n
Description
If the -y parameter is specified, the disk is set into Identify mode. While the disk is in
Identify mode, its amber Ready light flashes at approximately one-second intervals. The
-n flag switches off Identify mode.
Flags
-l PhysicalDiskName
Specifies the device to place into Identify mode.
-y Switches on Identify mode.
-n Switches off Identify mode.
364 User’s Guide and Maintenance Information