Compex Systems Advanced SerialRAID Adapters SA33-3285-02 User Manual
Page 523

RAID arrays (continued)
canceling all SSA disk drive identifications
changing member disks in an SSA RAID array
changing or showing the attributes of an SSA RAID
changing or showing the status of a hot spare
changing or showing the use of an SSA disk
changing the use of multiple SSA physical
creating a hot spare disk drive
deleting an old RAID array recorded in an SSA RAID
deleting from the configuration
identifying and correcting or removing failed disk
identifying array candidate disk drives
identifying hot spare disk drives
identifying rejected array disk drives
identifying system disk drives
identifying the disk drives in an SSA RAID array
installing a replacement disk drive
listing all defined SSA RAID arrays
listing all SSA RAID arrays that are connected to a
listing all supported SSA RAID arrays
listing array candidate disk drives
listing old RAID arrays recorded in an SSA RAID
listing rejected array disk drives
listing the disk drives in an SSA RAID array
listing the disks that are in a hot spare pool
listing the status of all defined SSA RAID
removing a disk drive from an SSA RAID array
removing disks from a hot spare pool
showing the disks that are protected by hot
swapping members of an SSA RAID array
RAID arrays creation and change attributes
hot spare pool creation and change attributes
physical disk change attributes
RAID Command Line Interface (continued)
RAID arrays creation and change attributes
RAID-1 and RAID-10 couple action attributes
RAID-1 and RAID-10 uncouple action attributes
RAID-5 physical disk change attributes
read subroutine
readx and writex subroutines
reformatting a pdisk as an hdisk
relationship of disk drives and adapters
one pair of adapter connectors in the loop
pairs of adapter connectors in the loop, mainly
pairs of adapter connectors in the loop, some shared
removal and replacement procedures
changing pdisk and hdisk numbers
Index
503