beautypg.com

Compex Systems Advanced SerialRAID Adapters SA33-3285-02 User Manual

Page 196

background image

Hot spare selection

Default Assigns the coupled disk drives to the pool to which those disk drives

were previously assigned:

Primary

Each coupled disk drive is assigned to the hot spare pool to which the
Primary disk drive that it is copying is assigned.

Secondary

Each coupled disk drive is assigned to the hot spare pool to which the
Secondary disk drive that it is copying is assigned.

To get more control over this process, use the ssaraid command directly from
the command line or from inside a shell script (see “Using the ssaraid
Command to Create a RAID-Copy Array from a RAID-1 or RAID-10 Array” on
page 151).

RAID copy to be coupled

The name of the existing RAID copy to be used. Press the List key to list the
uncoupled copies that you can use to create the new copy. Leave this field
blank if you are going to select Disk drives to be coupled.

Disk drives to be coupled

A list of disk drives to be used for the copy. Press the List key to list the free
disk drives that you can use to create the copy. The number of disk drives
selected must equal Number of disk drives required. Leave this field blank if
you are going to select RAID copy to be coupled.

176

User’s Guide and Maintenance Information

|

||
|

|
|
|

|
|
|

|
|
|
|

|
|
|
|

|
|
|
|
|

|