Dual-host system with only one system switched on – Compex Systems Advanced SerialRAID Adapters SA33-3285-02 User Manual
Page 218
Dual-Host System with Only One System Switched On
Figure 31 shows a dual-host system that has just been switched on. The system
contains a RAID-1 array, but the primary disk drive is missing because system 1 in not
switched on. The array remains in the Offline state on both systems until either of the
following occurs:
v
The primary disk drive becomes available.
v
The Split Array Resolution flag is set to Secondary.
Secondary 1
Split Array Resolution
= Primary
System 2
SSA Adapter
Figure 31. Dual-Host System with Only One System Switched On
198
User’s Guide and Maintenance Information