Compex Systems Advanced SerialRAID Adapters SA33-3285-02 User Manual
Page 525

SMIT (or SMITTY) options (continued)
Change/Show Characteristics of an SSA Logical
Change/Show Use of an SSA Disk
Change/Show/Delete a Hot Spare Pool
Enable/Disable Fast-Write for Multiple Devices
Identify Array Candidate Disks
Identify Disks in an SSA RAID Array
List All Defined SSA RAID Arrays
List All SSA RAID Arrays Connected to a RAID
List All Supported SSA RAID Arrays
List Components in a Hot Spare Pool
List Disks in an SSA RAID Array
List Status of All Defined SSA RAID Arrays
List Status of Hot Spare Pools
List Status of Hot Spare Protection for an SSA RAID
List/Identify SSA Physical Disks
Remove a Disk from an SSA RAID Array
Swap Members in an SSA RAID Array
SMIT menu for SSA adapters, getting access
SMIT menu for SSA disks, getting access
SMIT menus for 3-way copy operations
SMITTY (or SMIT) commands
solving hot spare pool problems
solving problems with SSA links
examples
broken loop (disk drive removed)
special files
special files, disk device driver
configuration of RAID-1 and RAID-10 arrays
operation after a loss of member disks
split-site management (continued)
adapter not known to remaining half of the
one half of the array is not present
split and join procedure not performed
SRNs (service request numbers)
SSA adapter device driver/head device driver
SSA adapter ID during bring-up
SSA adapter, removal and replacement
SSA Adapters SMIT menu, getting access
SSA Command Line Interface for RAID
hot spare pool creation and change attributes
physical disk change attributes
RAID arrays creation and change attributes
SSA disk concurrent mode of operation interface
top kernel extension entry point
SSA Disks SMIT menu, getting access
error log analysis
error logging
error logging management
SSA link error problem determination
SSA loops
finding the physical location of a device
Index
505