Metrohm 796 Titroprocessor User Manual
Page 41
3. Configuration
796 Titroprocessor, Instructions for use
35
35
User level
Switches between standard and expert user level.
Standard
= use of key cards possible,
customizable status settings, modifyable
softkey bars
Expert
= no key cards, 726 Titroprocessor-
compatible dialog
Key card
yes
: Access to the 796 Titroprocessor is only
possible by use of a key card. Status settings and
the configuration of the softkey sets are loaded from
the access control configuration file of the key card.
Monitoring
on
: The presence of a key card inserted is
monitored frequently during a sample series. If a key
card is missing after the finish of a determination
series, an automatic user sign-off will occur.
Date
System date in format YYYY-MM-DD
Time
System time in format hh:mm:ss
Settings for determination files:
Each determination is automatically allocated a file name . There are various
ways of creating this file name. Combinations of determination time/date,
run number, sample identification and/or a particular standard text can be
defined.
Standard
data file name
Standard text, which can be used for automatically
naming determination files. The file names are
produced automatically under file name type during
the determination according to the given mask.
file name type
Mask for the automatic creation of file names for
determination files. The selection list:
standard+run number
only standard file name
standard+run number
date+ run number
sample identification+
run number
only sample identification
YYMMDDhh.mms
date+time
Example:
Standard file name = 'DATA'
Run number = 005
а
а
produces the file name: DATA005.dtm