Metrohm 796 Titroprocessor - Manual (Page 233)

11. File manager
796 Titroprocessor, Instructions for use 227 227
ЪДДД File manager: Data card ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД¿
³ Label : 796 Applications Files : 65 of 256 ³
³ Capacity: 262144 Bytes Avail.: 4216 Bytes ³
³ ³
³ File Comment Size ³
³ ДДДДДДДДДДДД ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД ДДДДД ³
³ NaOH.mth Titer of NaOH 3816 ³
³ HCl.mth Titer of HCl 3819 ³
³ Iodine.mth Iodine determination 3722 ³
³ Chloride.mth Determination of chloride 3673 ³
³ Sulfate.mth photometric sulphate determination 3712 ³
³ CaMgTap.mth Calcium / Magnesium in tap water 3746 ³
³ Hardness.mth total water hardness by photometric titration 3810 ³
³ Acidcapa.mth acid capacity in tap water 5179 ³
³ Tapwater.mth Total water hardness 7998 ³
³ ClinTap.mth Chloride in tap water 3735 ³
³ BlankS04.mth Blank determination for sulphate in water 3994 ³
³ Sulphate.mth Sulphate in water samples 4062 ³
³ Oxiblank.mth Blank of Oxidizability 5452 ³
³ Oxi.mth Oxidizability of waste water 3847 ³
³ Oxygen.mth Oxygen in water 3615 ³
³ TAN.mth Total Acid Number 3657 ³
³ TBN.mth Total Base Number 3657 ³
АДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД QUIT ДЩ
ЪДДДДДДДВДДДДДДДВДДДДДДД¿ ЪДДДДДДДВДДДДДДДВДДДДДДД¿ ЪДДДДДДДВДДДДДДДВДДДДДДД¿
³Change ³Change ³Un/Lock³ ³ Load ³ Copy ³Delete ³ ³Un/Mark³Un/Mark³ >> ³
³view ³storage³ file ³ ³ from ³ to ³ ³ ³ ³all ³ >> ³
АДДДДДДДБДДДДДДДБДДДДДДДЩ АДДДДДДДБДДДДДДДБДДДДДДДЩ АДДДДДДДБДДДДДДДБДДДДДДДЩ
11.2 File operations
It is strongly recommended that a data card is not removed during file
operations !
Softkeys
[Change
alters the file list display
view]
[Change
selects a different memory area
storage]
(working memory, internal memory, data card)
[Un/Lock
marks a file with an ' *' as blocked
file]
(write-protected) and vice-versa. A blocked file cannot
be deleted or overwritten. It must first be unblocked.
[Load from]
opens a selection list for selecting a memory area from
which a file is to be copied into the memory area
currently opened.
[Copy to]
opens a selection list for the selection of the
memory area to which the marked file(s) are to be
copied. If no file has been marked then the file selected
with the cursor will be copied.
[Delete]
deletes the marked file(s). If no file has been marked
then the file selected with the cursor will be deleted.
[Un/Mark]
marks the file selected with the cursor and vice versa.
[Un/Mark
marks or unmarks all files in the shown
all]
memory area.
[ >>
switches to second softkey bar.
>>]