Metrohm 796 Titroprocessor - Manual (Page 281)

13. Appendix
796 Titroprocessor, Instructions for use 275 275
No. of samples
Defines the number of samples to be processed.
*
indefinite number of samples
Silo
all samples in the sample silo
Rack
all samples on the sample rack
edit. yes/no
: with 'no' it is not possible to change
the number of samples in the status window.
Statistics
Switches on or off the statistics function.
edit. yes/no
: with 'no' it is not possible to change
the status of the statistics function in the status window.
No. data records
Defines the number (2…20) of determinations to be in-
cluded in the statistics calculations. This setting also de-
termines the size of the working memory.
edit. yes/no
: with 'no' it is not possible to change
the number of data records in the status window.
Sample changer
Address of the sample changer (1 or 2). A blank entry
stands for 'no sample changer'.
edit. yes/no
: with 'no' it is not possible to change
the address of the sample changer in the status window.
Load methods from
Defines the storage location (Internal storage or Data
card) where a method can be loaded from.
Auto save data
Switches on or off the auto save function. Determination
data will be saved for further re-evaluation.
edit. yes/no
: with 'no' it is not possible to change
the status of the auto save function in the status window.
Save data to
Defines the storage location (Internal storage or Data
card) where determination data can be saved.
edit. yes/no
: with 'no' it is not possible to change
the storage location in the status window.
Clear working area
With 'yes' the working memory, the sample silo, the statis-
tics, the run number etc. will be cleared at start-up of the
instrument or while signing on with a key card.
Show method window
With 'yes' the method selection window will be displayed
automatically after start-up of the instrument or sign-on
with a key card.