Metrohm 796 Titroprocessor - Manual (Page 12)

1.3 Instrument description
796 Titroprocessor, Instructions for use 66
So-called PC cards which meet the Standard PCMCIA 2.x (68 Pins) / JEIDA
4.x can be used.
Flash cards can be read but not written on, e.g. the application card
(Order. no. 6.6038.000) supplied with the Titroprocessor
SRAM cards can be read and written on.
Capacity: 128 KB (Order no. 6.2245.010) to 2 MB (Order
no. 6.2245.030).
Card battery
Data cards are battery-buffered storage media. The battery must be
changed periodically in order to avoid data loss. Make a note of the expiry
date of the battery which is given on the leaflet accompanying the card.
Important:
The expiry date of the battery refers to a storage temperature of 25°C. At
higher storage temperatures the working life of the battery is shorter. Do not
carry the card next to your body; do not store it near a heater or expose it to
direct sunlight. The battery has to be replaced while the card is inserted in
the instrument.
1.3.7 The built-in thermal printer
Titroprocessor models with built-in printer (2.796.0020 and 2.796.0120) can
additionally have a second printer (or two) connected to an RS 232 inter-
face. However, an additionally connected printer must have a serial interface
as Titroprocessor models with built-in thermal printers do not have a parallel
printer interface.