Metrohm 796 Titroprocessor - Manual (Page 102)

6.2 Sample silo
796 Titroprocessor, Instructions for use 96 96
[<-- Out
sets the output pointer '<' to the silo line selected
pointer]
with the field cursor.
[--> In
sets the input pointer '>' to the silo line selected
pointer]
with the field cursor.
[Copy
copies the silo line selected with the field cursor into
line]
the local buffer memory.
[Cut
copies the silo line selected with the field cursor into
line]
the local buffer memory and deletes the current line.
[Paste
inserts the contents of the local buffer memory in
line]
front of the current silo line.
[Sample
opens the dialog window for defining the sample
idents]
identification column.
[ >>
switches to the first softkey bar .
>> ]
6.2.1 Sample silo configuration
The edit mode of the sample silo can be configured. This is done by
pressing the [Edit mode] softkey.
ЪДДД Edit mode ДДДДДДДДДДД¿
³ ³
³ AutoCopy on ³
³ Edit direction line ³
³ ³
АДДДДДДДДДДДДДДДДДД QUIT ÄÙ
• If during data input the total contents of a silo line are to be copied into
the next line at the end of each line then the automatic copying function
should be switched on (AutoCopy 'on').
• The sample table can be worked on line by line or column by column.
Select Edit direction 'line' or 'column'.
Settings which differ from the standard settings are shown in the sample
table frame.
³
ÄÄÄ copy; column ÄÄÄ QUIT ДЩ
ЪДДДДДДДВДДДДДДДВДДДДДДД¿
³Un/Mark³Edit ³ >> ³
³ ³mode ³ >> ³
АДДДДДДДБДДДДДДДБДДДДДДДЩ