Metrohm 796 Titroprocessor - Manual (Page 14)

1.4 Instrument description
796 Titroprocessor, Instructions for use 88
1.4.3 Action keys
NEXT DELAY SKIP
START STOP
HOLD
CONT
The action key have an immediate effect on the course of a method. The
key starts a method; the key ends it. The CONT> key can be used to interrupt a method or to resume it.
If the key is pressed at the same time as an action key the proc-
essing of a series of samples can be controlled directly (with Autostart 'on').
(=NEXT) ends the processing of the current sample and
starts processing the next sample in the series.
(=DELAY) stops the sample series after the current sam-
ple has been processed.
(=SKIP) ends the execution of the current command and
jumps to the next command line of the loaded method.
1.4.4 Manual printing
LINE
FEED
PRINT
STOP FORM
PRINT
SCREEN
The built-in A4 thermal printer or any other connected printer can be oper-
ated manually with the yellow printer keys.
The key opens the printer menu where the type of report can be
selected. Global reports and determination reports (if a determination report
is present in the working menu) can be selected.
(= STOP PRINT) interrupts a printout immediately.
executes a line feed on the connected printer.
(= FORM FEED) executes a form feed on the con-
nected printer.
prints the current screen contents.
1.4.5 Navigation and editing keys
QUIT
The key closes an editing field, a window or a dialog page and ac-
cepts previous parameter modifications. The dialog switches to the next
higher level.
(= Insert) switches the insert mode on/off for editing an entry
(= Delete) deletes the character to the right of the cursor position
deletes a complete editing field.
places the cursor on the first editing field of a dialog window (in
navigation mode).
places the cursor on the last sample silo line or command line (in
method editor).