Rockwell Automation 1336S Plus FRN 1.xx-5.xx - Manual (Page 3)

The information below summarizes the changes to the 1336 PLUS
User Manual since the last release.
Description of New or Updated Information See Page(s)
Incorporated 1336S–DU002A–EN–P and 1336 PLUS–5.3DU3
Document Updates. 5–54 & 2–36
Notes added to mounting diagram. 2–1
!
ATTENTION: With the release of Firmware Version
4.01 & up, the resolution of several parameters has
been enhanced to 0.1 units. In some cases this will also
affect the Minimum, Maximum and/or Default values
of these parameters. Users with PLC or SCANport
t
device configurations must make the appropriate
programming changes. Failure to do so may result in
personal injury and/or equipment damage. The
parameters affected are:
Minimum Freq page 5–11, 5–14
Maximum Freq page 5–11, 5–14
Maximum Speed page 5–45
Motor NP Hertz page 5–13, 5–46
Base Frequency page 5–53
Break Freq page 5–52
Accel Time 1 page 5–10
Accel Time 2 page 5–16
Decel Time 1 page 5–10
Decel Time 2 page 5–16
DC Hold Time page 5–17
S Curve Time page 5–23
Summary of Changes